HD 3650 is targeted as the low end graphic card - therefore the performance of this card of course far from en...Monday, 27 April 2009
To completed our review to this (Zotac 9600GT supreme) graphic card, I dedicated to find voltmod for this card...Tuesday, 11 November 2008
A view month ago, i was try to do the voltmod for some of the Point of View 8600 series card. Point of View fo...Tuesday, 11 November 2008
This guide actually has been posted view month ago, but to complete our voltmod,p guide database I decided to ...Tuesday, 11 November 2008|
Leadtek Memperkenalkan Kartu G... Mantap nih, |
| 07/02/10 22:20 |
| ajie |
|
Hitachi Pasarkan Harddisk 2TB @bintang mas : thanks atas infonya.. |
| 31/01/10 14:41 |
| lombok_oc |
|
Mengenal Kode Beep BIOS @airin: yup cuma itu developer bios yang paling banyak dipak... |
| 31/01/10 14:39 |
| lombok_oc |
|
Mengenal Kode Beep BIOS Setau gw cuma itu deh developer bios, at least yang diapaki ... |
| 31/01/10 14:38 |
| rama |
|
Mengenal Kode Beep BIOS kode beebphoenix blum lengkap tuh
|
| 28/01/10 14:45 |
| aldo |
akin Tuesday, 11 November 2008

To completed our review to this (Zotac 9600GT supreme) graphic card, I dedicated to find voltmod for this card. Like what I have said before, this card is using the diffirence method to control the GPU voltage, in the reference card there was new method, where the voltage control IC's using digital ( DAC) method to control the output voltage. But, this card is using diffirence IC's to control the voltage. The IC's where used in this card is just using the standard method. I try to find out the GPU and memory voltage mod, and below is the result.
Do this voltmod with your own risk !!!The default resistance value is 1.6K ohm, to rise up the voltage, just connect 50K ohm VR to the spot given on the picture.

For the memory voltage mod, just connect 20K VR on the spot on the picture to ground. The default resistance value is 608 ohm.

Pencil trick is possible to apply on this mod, to do that just scratch the resistors on the picture using 2B pencil. Don't forget to check the output voltage by connecting voltmeter positive probe on the spot that I give on the picture.
http://www.ipetitions.com/petition/babyeinstein/
is a true story